Marks 2017 Ram R/T headlight upgrade



High Beam Lights - 9005 Bulb Type.
Low Beam Lights- 9005 Bulb Type.
Fog Lights - 9006 Bulb Type.
License Plate (2x) - 194 bulb type.
Glove box (1x) - 194 bulb type.



Stock Low beam projectors and Fog lights on.





Stock Low beam projectors and High beam lights on.





9005 bulb type - Canbus Error Free - 6000K - 35w - Low Beam HID projector lights.





9005 LED - 6500k - High Beam lights.
Lower profile cooling fan is required for Ram light housing.





9006 LED - 6500k - Fog Lights.





Canbus error correctors are required for Low, High and Fog lights.
The HID lows above come with a Canbus error corrector already.
I ordered 2x of the below (total 4 error correctors) for the High beams and the Fog lights.





194 Canbus error free 194 LED bulb type.





194 LED in my glove box. (1x)





194 LED in my license plate. (2x)





Fog light LED 9006 bulb install.





The Ram stock light housing has a back cover to access the light bulbs.
Once I installed the light bulbs for the Low and High beams,
I quickly realized the wires and boxes were not going to fit inside.
I made small slits on the housing so that the wires would poke out and still seal the box.
I then mounted the boxes to the housing using 3M double sided stickey tape.




















Removing the grill is super easy and recommended to remove to get the light housings out.
Remove the 4x bolts on the top of the grill.
On the right and left sides there are gromits (2x each side) that need to "pop" out.
Be careful to pop the grill straight out so as not to break the gromits.





New HID low beams, and New LED Fog lights on.





New HID Low beams, and New LED High Beam lights on.





New HID Low beams on.





New HID Low beams, and New LED Fog lights on.





New HID Low beams, and New LED High Beam lights on.





New HID Low beams, and New LED Fog lights on.





Canbus error correctors doing their job. No car alarms.