Start to loosen the oil filter.
Remove wrench and loosen with your hand.
Allow the oil to drain until you can remove the filter.
Clean the sealing surface of the oil filter.
Clean the sealing surface of the drain plug.
1/2 fill the oil filter (with oil) before you install it.
Lubricate the rubber seal with oil.
Get a torque wrench with 15mm socket, and set to 18ft lbs
Tighten the drain plug to 18 ft/lbs
Install new oil filter.
Tichten to 22 ft/lbs.
Install 6 quarts of oil and look for leaks.
After test drive, verify for any leaks and check oil level.